yea at this stage is doesnot look like i will be bringing the cordia coz it needs a new clutch and radiator...ill try make it there in sumthin

I think the idea for the one in 2 months will be cool too.
though i will be there this sunday for sure.

just gotta find hornsby macdonalds. lol.

can one of you guys that know where it as pm me your mobile number incase i get lost.??

thanks

_________________
1984 AB GSR
4G62 tc05 Highflow
-----------------------------
On The List.
2.5" exhaust and new muffler
Front Mount Intercooler
Boost Guage

Great that theres more interest everyone. good stuff

If your not sure of where to go try whereis.com.au its preety helpful

Brad

_________________
AC GSR - vr4 2litre

sounds like a good idea having one in a couple of months

_________________
CORDIA AB VR4

isnt it thornleigh maccas cause there is no hornsby maccas on pennant hills road it thornleigh thats the mcdonalds head office...
may come down for the meet up...aint cruising up but

_________________
1984 aB cOrDiA gSr, Rx7 iNtErCoOlEr, LoWeReD, TyPe 1 BoV, 5" cAnNoN, RaCeR tEcH 7 CoLoUr BoOsT gAuGe, MoToR sPoRt TuRbO tImEr, 16" EnKaI MaGs, x2 AvAlAnChE 6 x 9's, SoNy 6", SaNsUi 12" SuB, bOsS 1000 wAtT aMp, KeNwOoD hEaDuNiT

the meetup was originally at thornleight maccas, its now changed to hornsby maccas (as theres another cruise meet-up at thornleigh at the same time...)
i should be bringing my cordia , jus gotta do oil changes etc 2morow...
catchyas

_________________
ex MAD.48U Cordia

Hey Bouncy where are you from?

_________________
The only way to discover the limits of possible is to go beyond them into the impossible.
VR4.Wolf 3D.VL-T fuel pump.hybrid 600x300x100.2.5" piping.TD06 167fwkw 15psi

auburn. haha.... the un-seen local...

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

yea thats me.

im right next to auburn station, its like 150 metres from my apartment block.

_________________
1984 AB GSR
4G62 tc05 Highflow
-----------------------------
On The List.
2.5" exhaust and new muffler
Front Mount Intercooler
Boost Guage

any of you sydney guys going to the dyno day on saturday morning.?
http://www.cordiapower.com/forum/viewtopic.php?t=9191

im most likey going to go, dont know if ill put my car on the dyno or anything like that. but ill go and see what every one else pulls.

_________________
1984 AB GSR
4G62 tc05 Highflow
-----------------------------
On The List.
2.5" exhaust and new muffler
Front Mount Intercooler
Boost Guage

hey bouncy do you live in bourne street by any chance????

_________________
1984 aB cOrDiA gSr, Rx7 iNtErCoOlEr, LoWeReD, TyPe 1 BoV, 5" cAnNoN, RaCeR tEcH 7 CoLoUr BoOsT gAuGe, MoToR sPoRt TuRbO tImEr, 16" EnKaI MaGs, x2 AvAlAnChE 6 x 9's, SoNy 6", SaNsUi 12" SuB, bOsS 1000 wAtT aMp, KeNwOoD hEaDuNiT

Hi everyone,

Sorry to do this the actual address for the meet up is

Store Name: Mc Donalds Mt Colah

Suburb: MOUNT COLAH

Postcode:2079

Address: 513-517 Pacific Highway Cnr Pacific Hwy & Lady Street

Phone Number: (02) 9476-8711

All other details are same as 1st post.

try http://www.whereis.com.au and put in that address and it will show you where it is.

Hornsby mc donalds was actually in a westfield building, the one we are going to is MT COLAH at the above address, its only 5 minutes further up the road.

Hope everyone can find it. Ask or ring if your not sure.

Regards Brad

_________________
AC GSR - vr4 2litre

By the way if you read the above post and were/are coming to the meetup at least could you reply to this thread so i know that everyone at least knows its at MT COLAH MC DONALDS, leaving at 10am.

Just so i know how many we might have coming.

Thanks everyone.

_________________
AC GSR - vr4 2litre

so wat time will people be getting to the maccas? cause i dnt wanta be 2 early and be a loner
yeh my colah sounds good, as long as everyone knows lol
catchyas

_________________
ex MAD.48U Cordia

leaving mt colah mc donalds about 10am.

If anyone from newcastle or central coast want to cruise with 3 other cordias down to mt colah we will be leaving the southbound servo on the freeway at 8.30

Brad

_________________
AC GSR - vr4 2litre

uh-ohhh... thas early

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

yes it is early enough.

But when there is four of us that are travelling up to 200km just for the meetup then going on the trip you need to start early.

Hope you sydney guys put in some effort and turn up.

Well im leaving now, hopefully see a few cordias at mt colah mc donalds.

Brad

_________________
AC GSR - vr4 2litre

i'm tempted to drive my other car... but will probly just go wit jay haha... cyas (btw.. we need a cruise a lil later, when my cordia's done!!!!)

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

Thanks to those of you wo made an effort to come on sunday (Jay, D3bb4, nizzy, Dave, Mitch and of course Brad for organising it all. It was a pity so many couldnt make it or had car troubles or unfinished projects etc.

D3bb4 - cant wait to see your car when its finished - sounds like its gonna be a weapon.
Dave... your car is the near all-round perfect cordia if you ask me - i love it - so nice and clean all round and hope everything goes well with the problem you were having (im sure it will be simple like a tuning issue)
Jay - i want those seats!!! lol sounds like you got some good power there and good luck with the gearbox and brakes.
Mitch - gotta love the blue with 18" chromies and seeing you doing 100kph with your driving instructor father next to you lol - love it
Nizzy - you still got a cordia or getting another one?? i heard your maroon one was or is nice - would be good if you got a cordia for next time - good of you to come along unlike alot of others.

Hopefully next time everyones cars will be at least running.

Once again thanks guys especially d3bb4 and nizzy even though you's couldnt bring cordias and Mitch for driving all the way from Singleton and back on L plates. Dave for rushing to get he car done and driving all that way and Brad for organising it all. good to see some effort.

Im sure next time will be bigger and better and hopefully my car will be more complete too

that was a good reprt, gotta say
ive fixed the car alreday (running lean on idle, waay 2 rich on deceleration), pcv valve not connected etc, its all seewt now
yeh next time in a few monthst will be sweet
and kev, your engine bay is the most farkin unreal thing ive yet seen in a cordia!! i love it! gotta get sum pics up mate
but yeh overall was good 2 see everyone...
cheers

_________________
ex MAD.48U Cordia