errrrrrrrm. WTF?!?!?!?!?!?!

_________________
~ ~ ~ ~ ~ ~

roger, mate, you still dont know how to quote properly

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

Yes ,But a VR4 in a cordia is not,so your car is completly unoriginal,that is fact,i gota cordia engine in a cordia car,thats original.

roger, clearly you are changint the topic.. if you're gonan have a domestic with your mum, i suggest you fix it before further pissing her off

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

ya momma's on the top of my things to do list

_________________
~ ~ ~ ~ ~ ~

okay, i can't be bothered reading the 2 pages of bullshit that this thread is. so i will say this, if it has already been said then bad luck it's getting said again

*roger this is NOT a cruise, so wtf is it doing in the cruises section?!?! I said something in your last gay thread that was posted here, but obviously you didn't get the hint last time that this is a section FOR PLANNING CRUISES AND EVENTS!!!!!!!

*your car is NOT stock

*14.8 carefull now, with a blistering time like that you should be carefull not to blast off this earth like a rocket! i'm looking forward to seeing that blistering time in the next FF top 10 fwd times.
14.8 is NOT the fastest unrebuilt 4g62 in oz, so please don't talk shit.

*post your time slip because nobody really cares! you ran a 14.8 OMG! NOBODY CARES!!!!! start running 12's then people might care

i have been giving you the benifit of the doubt for ages and i thought that some people's comments toward you had been far too harsh, but now after yet another shit thread from you and a lot of shit talking i join that crowd.

mods- please don't only lock this thread but delete it aswell as it is totally shit

oggy, just check page 2; it's good

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

LOOSERS in big capital letters,jelous freaks,yes thats right.debba more like debbie,grow up.

jealous? ROFL! yes, of course, there's soooo much to be jealous of and all you still cant fukn spell jealous can you? lol... spell as bad as ur mum aye? she doesnt even know how to spell ur fukn name! grow up? awwww... but i just turned 18 ROFL!!!!!!!!! IN BIG CAPITAL LETTERS!

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

Just wondering which Cordia's came with a 4G63. Was it japanese spec?

_________________
Thanks

A 2.5 inch zorst does not give a cordia 200kilowats,every cordia has them,plus my rear muffler is baffled/offset badly,so my zorst is not the best,a rad does not make a car powerful,its the engine,my engine is STOCK STOCK STOCK,my engine is STOCK STOCK.The engine makes the car go not intercooler pipes,radiators,Candles,strings.THE ENGINE my engine is stock.You still dont get it,mmmmm i dont t5hinkl so.

i have now read page 2 and have never read so much bullshit in my entire life, and i go to school with faggots that have a whack over a 5l commodore! so i know bullshit!


hmm, that sounds a good second faster than you roger and i guess coz he hasn't rebuilt it, has tc06, standard computer and a fudged clutch that he's is just as "stock" as yours.

i highly doubt that the quicker run was caused by the new cooler set up, sure you may have made like 5kw extra but just because you ran ONE 14 second time does not mean anything.

roger you talk shit, nearly everything you say is shit. everything that you have ever said on this forum should be deleted as nearly every single post that you have made has been total shit.

mods delete this thread and ban roger for his shit talking. delete my comments if you wish as i know that i am violating the "don't pick on other forum members rule" but seriously i have had enough of the bullshit.


well if they don't make your car go, take them out and see how far/well/long your car goes for


pull the head off and post a pic of it, then i will believe that you have jet valves.... because i believe that this is yet another piece of shit coming out of your mouth!

you're such a fvcking tool.... and notice that ur sig. says that you have "no fuel" wtf do you run it on? "dreams and spirits?" ROFL!!!!!

your shit is not stock, it's too fvcking ugly to be stock, so dont start homie.
btw, [CORDIAL] has a 4g63, and it runs faster times than you, so what do you say bout that LOSER?

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

....and what exactly is your point?

_________________
~ ~ ~ ~ ~ ~

yeah there were japspec cordia's with sohc, 8 valve 4g63's. there were also some with 1.6 fuel injected turbo's, and there is rumoured to be an ultra rare concept cordia with constant 4wd and a 250kw DASH 4g63

ohh and i just thought i'd add that "mitsboost" ran 13.8, yep that's right 1 whole second quicker than you roger, with a 1.8 that had a bloody top mount cooler!
so i guess you are still the quickest "stock" cordia in the land

god damn.,

this almost makes me want to buy a stock cordia.. put a 3.5inch exhaust and an ARC 600x300x100mm front mount cooler on it and full tune. just to beat his time so he'll shut the fvck up!!!!1

stupidest quote ever.

rofl...hell yes, rodger is a very original man

from the stupidest member ever... meh, roger's comebacks are getting repedative/boring now. AND I WANT A DYNO PRINTOUT FOR 120KW ATW DAMNIT!

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done