at idle its sounds like a sligthly open zorst,but wen boost comes it sounds like a jet.

one more thing where will you guys be at maccas or krispy creame so i know when i get there

and i wont be on the dyno i am going jus for the cruise because my car is not ready see yas tomorow

Look out for a bold guy in a silver cordia GSR

_________________
-Life starts when you get a cordia GSR
-watch out for a silver GSR crusing the streets near you!
- Work in progress

tell us how it goes and how many cordz went aye david

_________________
1984 aB cOrDiA gSr, Rx7 iNtErCoOlEr, LoWeReD, TyPe 1 BoV, 5" cAnNoN, RaCeR tEcH 7 CoLoUr BoOsT gAuGe, MoToR sPoRt TuRbO tImEr, 16" EnKaI MaGs, x2 AvAlAnChE 6 x 9's, SoNy 6", SaNsUi 12" SuB, bOsS 1000 wAtT aMp, KeNwOoD hEaDuNiT

can you post the results of the dyno of the cars.

hey guys,
was a pretty good turnout form the clubvr4 guys/gal.
results from the cordia's that were on dyno...

me = DASH 12v
117.1kw @ 139kph, 4691rpm (13.1psi) 11.1 AFR
386.4NM @ 113kph, 3818rpm (14.8psi) 11.6 AFR

sleeping giant = VR4
113.6kw @ 155kph
310NM @ 132kph
average AFR was 10.7 i think

trixen = 4g62bt
68kw, was misfiring badly and didnt want to rev

pretty pleased with my result, but after looking at the dyno sheets it reaches 14.8psi at 3800rpm, then by 5000rpm has dropped to 12.2psi the guy says it needs a tune..
sleeping giant (brad) had problems with running quite rich, hopefully will get it sorted for next time , and trixen only recently bought the car, was a good opportunity to see what was going on with the motor .

_________________
ex MAD.48U Cordia

Great day out! Quite interesting too.

My highest was 113.6kw @ 12.2 psi and 310nm

The only two numbers for my air /fuel 10.6 and 10.7 for the whole run. The line is FLAT.

I wish there was a highest odometer comp. i might of won that. 358969km

I suprised the gearbox still works.

my car has 546nm@ the wheels

Thats a freaky 1.8 then roger. wanna swap for my vr4 with tdo5 14b.
(joke by the way)

That number is possibly a number we got called Motive Force on our dyno sheets. My motive force says 639.3266 @ 132kmh, Torque was 310nm at 132kmh according to these dyno sheets from yesterday.

After seeing your car roger and mods you have done I would guess that your torque might be around 250nm. Considering a standard leaded motor wih tco6 has 210 nm standard.

I dont know what motive force is either sorry. By the way Rodger not trying to be a smart arse or anything just trying to help.

i understand man,250 is right.