| Cordia Forum https://www.cordiapower.com/forum/ |
|
| 3D Printer https://www.cordiapower.com/forum/viewtopic.php?f=8&t=17989 |
Page 1 of 1 |
| Author: | S1VART [ 28 Jun 2016, 11:07 ] |
| Post subject: | 3D Printer |
Has anyone got a 3D Printer my little bloke wants one and dont know much about them |
|
| Author: | TRQ-STR [ 31 Aug 2016, 20:16 ] |
| Post subject: | Re: 3D Printer |
I got one trav, been into it for a while now. Ask away! |
|
| Author: | 0-PSI [ 31 Aug 2016, 21:33 ] |
| Post subject: | Re: 3D Printer |
Wonder if the one from Jaycar is worthwhile? You would hope so for $700. |
|
| Author: | TRQ-STR [ 31 Aug 2016, 22:30 ] |
| Post subject: | Re: 3D Printer |
Total waste of money IMO, here are two entry level options actually worth buying: Wanhow duplicator i3 v2 or newer: Great first 3d printer with plenty of support for upgrades! PLA only out of the box as it is an open frame design. ABS is possible with an enclosure and heated bed but a heated chamber is required for great results. The UP mini is great also: ABS only, Small build volume Locked down to UP brand filament unless you hack the firmware. Version 2 is due for release any time now, would be a great first printer capable of small functional parts. At work I use a CEL Robox and personally own a very modified Ultimaker 2+. ABS only for me as I mostly prototype or print functional parts . Hopefully will see some parts put to use in the cordia, lol. PLA only is fine if you are buying the printer just to 3d print. All things on Thingiverse.com will be printable, however the materials low glass transition temperature limits it's use in the real world. |
|
| Author: | S1VART [ 07 Sep 2016, 15:03 ] |
| Post subject: | Re: 3D Printer |
I ended up with one of these , the Mrs wanted one were the kids couldn't put there hands into it while it was on http://www.harveynorman.com.au/da-vinci ... inter.html its not bad , but Im still so ameture at using it , Ive found https://www.thingiverse.com/ is really easy to download and use Ive made Striker caps for the doors in my Verada , also started making a supercharger also but doing it bit by bit |
|
| Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|