For sale: Parts from a working 1.8 turbo cordia
Item Condition: Check photos and descriptions below
Price and price conditions: Check below
Extra Info: All parts are in good working order unless stated otherwise
Contact Details: PM me or send me an email at sominvn@iinet.net.au
Location: Sydney
Delivery & Conditions of Delivery: Happy to arrange postage at buyers expense and pick up is welcome


All parts are for the 4G62 turbo SOHC.


Gates secondary belt for balance shaft - $20




Hypatec 0.50 oversize pistons. These are not forged items - $60




10mm Magnecor spark plug leads. This is a good purchase if you plan on keeping your car for a while. You'll never have to buy leads again. And from what i've heard the guy that makes up these leads in sydney has gone out of business, so they'll be harder to come by - $80 for the set.

AFM in working order. There's a K&N air filter in there. The airbox was repainted about 2 years ago with crinkle coat paint. Unfortunately i had just about run out of the stuff so it's only a light covering. $30 for the K&N filter, $10 for the AFM and airbox. K&N air filter SOLD AFM still available

What's up with the car?.......old, buggered, smashed......any body parts for sale?

Actually one of the reasons i'm getting rid of it is the condition of the body. There are some good bits though. The passenger side front quarter panel and door are ok. I'll be using most of the front end. The rear hatch is starting to be eaten by rust under the rubber wing. I'll be using the bonnet and the rest you probably couldn't give away. Another reason is the engine is blowing large amounts of oil smoke at idle. Cbf taking the head off this car again. The main reason though is i would like a bit more power. I've driven this car for 9 years and it's been very reliable in that time. I've replaced a lot of stuff...well most of the car actually but it's never left me stranded on the side of the road.

I forgot to mention above that this car is AC.

Actually i was wondering if you could help me out Bitza. Are there any crossover gaskets and seals between the 62 and the VR4? I have some cam seals and main bearing seals, just wondering if any would fit the VR4. I think i have every gasket and seal needed to rebuild a 62 so i'd like to know what i can keep. Thanks.

All the bottom timing case gaskets/seals I would keep.............the cam seals are the same so keep those aswell.

Thanks Bitza. Would this include the sump gasket? Are the water pumps the same?

For those that may have been interested, the throttlebody, injectors, fuel rail, regulator have all been sold.

Basically anything from the head down I would keep..........the waterpumps are a little different but I'm sure the gaskets are the same.

The K&N filter buyer fell through. Still available if anyone is interested.

pm'd

_________________
GENERALLY SPEAKING, YOUR NOT LEARNING ANYTHING IF YOUR LIPS ARE MOVING

PM replied

Magnecor leads are now on ebay

http://www.ebay.com.au/itm/10mm-Magnecor-R-100-Racing-Spark-Plug-Leads-Mitsubishi-Cordia-4G62-/190601673075?pt=AU_Car_Parts_Accessories&hash=item2c60beb973

Hey have you got a drivers seat for sale? thanks

_________________
attycuz

No mate i don't.

Everything pictured is still for sale.

The Magnecor leads are just sitting here. They are 10mm leads, top quality, will only suit the 4G62. Anyone with the 1.8 who is interested should make an offer. They cost me about $180, i'm asking $80.

I have 2inch stainless steel intercooler piping to suit the 4G62 for sale still as well. Pic below is the best i have for how it will suit. Intercooler is not for sale. Make an offer.

I need a cover for my air filter and maybe piping, you know if they are the se size as the 4g63?

_________________
attycuz

Do you still have the gaskets?

Yep, I still have:
2 x intake manifold gaskets
2 x head gaskets
2 x rocker cover gasket.

Hey mate. if you have them.

how much would it cost to get you to put the below window trims - in a Tube and send them up to QLD 4285 ?

- 2 window trims (Rear Right window's bottom trim strip, and the hatch window right hand side vertical trim strip)

- and all the 4 Chrome Corner Trims off the Rear window.

pop me an email on d_nikiforides@hotmail.com

Cheers buddy.
Damien

Hey Damien,

Your about 6 months too late. The car went to the wreckers december last year. As far as i know the wreckers still have it intact.

Here is the old girl. You could try contacting these blokes they should be able to help you out...although getting those trim bits off without breakage can be a problem.

http://www.ebay.com.au/itm/Mitsubishi-Cordia-Roof-Racks-Fit-Other-Models-/230707455257?pt=AU_Car_Parts_Accessories&hash=item35b73c6519

Do you still have gaskets?

Sorry mate they are sold pending payment.

Intercooler piping is also sold pending payment