| Cordia Forum https://www.cordiapower.com/forum/ |
|
| W.T.B condrods to suit g63b https://www.cordiapower.com/forum/viewtopic.php?f=6&t=15856 |
Page 1 of 1 |
| Author: | cordia250 [ 24 May 2010, 18:34 ] |
| Post subject: | W.T.B condrods to suit g63b |
cant seem to find these of the shelf without having to go forged. anyone have a set or know where i can get these. thanks chris |
|
| Author: | esky [ 24 May 2010, 18:55 ] |
| Post subject: | Re: W.T.B condrods to suit g63b |
If they are the same as 4g62b , i'm sure i'll have a set in the shed somewhere |
|
| Author: | Bitza [ 24 May 2010, 18:58 ] |
| Post subject: | Re: W.T.B condrods to suit g63b |
Are they for a SOHC or DOHC? I have a standard set to suit Generation 2 VR4 DOHC. |
|
| Author: | cordia250 [ 24 May 2010, 22:25 ] |
| Post subject: | Re: W.T.B condrods to suit g63b |
There for a sohc. im not sure if the vr4 ones are the same i know there are a few different ones mainly the pin diameter i need ones with the 21mm pin. |
|
| Author: | cordiaaaturbo [ 24 May 2010, 23:58 ] |
| Post subject: | Re: W.T.B condrods to suit g63b |
I'll make a phone call 2morro i think i can get stock rods for around 80-120 bucks kit comes with new gudgeons |
|
| Author: | esky [ 25 May 2010, 00:30 ] |
| Post subject: | Re: W.T.B condrods to suit g63b |
4g62b have a 21mm pin |
|
| Author: | cordia250 [ 29 May 2010, 02:40 ] |
| Post subject: | Re: W.T.B condrods to suit g63b |
found a site with some info, rods from the 1.8 are the same and from some gallants. so anyone have an old engine or set of rods lying around |
|
| Author: | esky [ 29 May 2010, 19:21 ] |
| Post subject: | Re: W.T.B condrods to suit g63b |
Quote: so anyone have an old engine or set of rods lying around Sure do , but you will have to come and get them. pm'd |
|
| Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|