Cordia Forum https://www.cordiapower.com/forum/ |
|
WTB: Gear Shift Insulator https://www.cordiapower.com/forum/viewtopic.php?f=6&t=15774 |
Page 1 of 1 |
Author: | red23 [ 19 Apr 2010, 01:26 ] |
Post subject: | WTB: Gear Shift Insulator |
Hi, would any guys wrecking a GSR cordia, have a gear shift insulator in good condition? if not how much would it cost for a brand new one? and is the part number MB180367 )something along those lines). Need one asap. My gear stick went through the floor as I was about to drive through macas |
Author: | ETHER_ONE [ 19 Apr 2010, 11:33 ] |
Post subject: | Re: WTB: Gear Shift Insulator |
Cool! So does that mean your Cordia lives again!??? |
Author: | red23 [ 19 Apr 2010, 11:41 ] |
Post subject: | Re: WTB: Gear Shift Insulator |
hey george, Cordia is alive and kickin. Was doing well until the gear boot isolator went and my gear stick dropped :-) Lucky it didn't happed too far from home |
Author: | GSR MAN [ 19 Apr 2010, 22:40 ] |
Post subject: | Re: WTB: Gear Shift Insulator |
PM'd |
Author: | cordiaaaturbo [ 20 Apr 2010, 13:17 ] |
Post subject: | Re: WTB: Gear Shift Insulator |
EPIC LOL straight through the floor? they usualy dont fail that hard! over night |
Author: | red23 [ 20 Apr 2010, 14:01 ] |
Post subject: | Re: WTB: Gear Shift Insulator |
cordiaaaturbo wrote: EPIC LOL straight through the floor? they usualy dont fail that hard! over night yeah i found it funny but Terrianne didnt |
Author: | red23 [ 21 Apr 2010, 17:38 ] |
Post subject: | Re: WTB: Gear Shift Insulator |
Please close. I went to the wreckers and got a whole gear assembly. |
Author: | cordiaaaturbo [ 22 Apr 2010, 00:15 ] |
Post subject: | Re: WTB: Gear Shift Insulator |
easy swap too like REALLY easy |
Author: | red23 [ 22 Apr 2010, 15:24 ] |
Post subject: | Re: WTB: Gear Shift Insulator |
yeah it was ain't no thang :p |
Author: | thor_454 [ 26 Apr 2010, 14:26 ] |
Post subject: | Re: WTB: Gear Shift Insulator |
im chasing the exact same part, its a stupid set up, but so necessary. looks like you got the part number right by the way, mine is the same. |
Author: | SnickieX [ 26 Apr 2010, 17:05 ] |
Post subject: | Re: WTB: Gear Shift Insulator |
If you're talking about what I think you are, wrap a thick-ish copper wire around the top gear stick rod, there should be 2 rods under there, and the top one should be the one that holds the stick in the hole. And there should be small tunnel like things in the top of the tunnel for the gear stick rods which you can stick the wire in, it's the way my car is rigged up, and it's holding up. |
Author: | S1VART [ 26 Apr 2010, 20:28 ] |
Post subject: | Re: WTB: Gear Shift Insulator |
I will check tomorrow at work, to see if you can still get them new, maybe a group buy to make it cheaper? if there still avalible |
Author: | cordiaaaturbo [ 26 Apr 2010, 23:56 ] |
Post subject: | Re: WTB: Gear Shift Insulator |
they match FTO i was told when chadstone said they could get them 99 bucks |
Author: | S1VART [ 27 Apr 2010, 09:40 ] |
Post subject: | Re: WTB: Gear Shift Insulator |
I can do $90each x1 person $80each x3 people they will take a few weeks to get them in though as they have to come from Japan and I will need full payment before I can order |
Author: | SnickieX [ 28 Apr 2010, 17:46 ] |
Post subject: | Re: WTB: Gear Shift Insulator |
There any way you could give me the source for it, as I'm in the USA and...yeah...you get the idea. |
Author: | FRONTN [ 03 May 2010, 20:21 ] |
Post subject: | Re: WTB: Gear Shift Insulator |
I shouldn't have laughed @ you Red when it happened to you... Mine just fell through the floor today.. FAIL! epic fail lol! |
Author: | red23 [ 04 May 2010, 00:31 ] |
Post subject: | Re: WTB: Gear Shift Insulator |
FRONTN wrote: I shouldn't have laughed @ you Red when it happened to you... Mine just fell through the floor today.. FAIL! epic fail lol! oh you serious Tim? these rubber things must have a 25 yr life expectancy. btw I was around ur side of town last thurs night pickin up a set of wheels. was gonna call ya but I was in a hurry to get home |
Author: | FRONTN [ 05 May 2010, 21:56 ] |
Post subject: | Re: WTB: Gear Shift Insulator |
all good! i'll be visiting clark rubber this weekend to fix mine lol.. i remember i fixed one on my old cordia and it lasted longer than the car lol! |
Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |