Cordia Forum
https://www.cordiapower.com/forum/

Clutch for Vr4 engine
https://www.cordiapower.com/forum/viewtopic.php?f=4&t=17962
Page 1 of 1

Author:  GORAN [ 10 May 2016, 17:11 ]
Post subject:  Clutch for Vr4 engine

Hi all,

The plan is before the new engine goes in to get a new clutch.

I need a decent clutch but it has be ok for every day driving.

What would you recommend?

Also since the new rebuild gearbox will go on, I am thinking of
replacing the rear main seal, might as well.

What is the part number for one of them?

Cheers

Author:  4cylturb [ 12 May 2016, 23:41 ]
Post subject:  Re: Clutch for Vr4 engine

Exedy MBK6276HD. Installed one of these myself about 8 months ago on my daily. Car is making 180kw. Never had a problem. Great clutch!

Author:  4cylturb [ 12 May 2016, 23:44 ]
Post subject:  Re: Clutch for Vr4 engine

Forgot to mention i use standard cordia box and flywheel.

Author:  GORAN [ 13 May 2016, 11:50 ]
Post subject:  Re: Clutch for Vr4 engine

Thanks for that.

What is the clutch rated to?

My engine makes 264 kw at the moment.

Author:  4cylturb [ 24 May 2016, 02:10 ]
Post subject:  Re: Clutch for Vr4 engine

I'm not sure what the exedy is rated to handle. Did a quick search and couldn't find anything. I've read about people using them with your power levels but in the end it is still a relatively cheap clutch. About a dollar per kw for you (cost me $276).

Author:  S1VART [ 24 May 2016, 10:59 ]
Post subject:  Re: Clutch for Vr4 engine

this is the guy to call

http://raceclutch.com.au/

Page 1 of 1 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/