Cordia Forum https://www.cordiapower.com/forum/ |
|
ab gsr 2.0l 12v dash swap https://www.cordiapower.com/forum/viewtopic.php?f=4&t=17884 |
Page 1 of 1 |
Author: | jdfirefly [ 09 Dec 2015, 16:10 ] | ||
Post subject: | Re: ab gsr 2.0l 12v dash swap | ||
Its a shame it'll never be seen
|
Author: | Bitza [ 09 Dec 2015, 16:45 ] |
Post subject: | Re: ab gsr 2.0l 12v dash swap |
You will need to run the 1.8 injection system on that engine, unless you have the ECU and working injectors...........if you use the 1.8 cordia injection the engine will run extremely hot under power as air/fuel ratios will be lean, if it were me I would look for a second hand VR4 engine with loom (maybe already out of a cordia) and use that.................more bang for buck! |
Author: | jdfirefly [ 09 Dec 2015, 21:48 ] |
Post subject: | Re: ab gsr 2.0l 12v dash swap |
Im dedicared to the 12v, what injectors does it run? |
Author: | jdfirefly [ 09 Dec 2015, 21:56 ] |
Post subject: | Re: ab gsr 2.0l 12v dash swap |
Would an ecu for a gallant 2.0L part number MD161840 work |
Author: | Bitza [ 10 Dec 2015, 07:08 ] |
Post subject: | Re: ab gsr 2.0l 12v dash swap |
No, the engine is still centre point, the dash runs a small injector and a staged large injector, best to use the cordia injection. |
Author: | jdfirefly [ 10 Dec 2015, 15:47 ] |
Post subject: | Re: ab gsr 2.0l 12v dash swap |
Is remaping the 1.8 ecu an option? Thanks andrew |
Author: | Bitza [ 10 Dec 2015, 16:31 ] |
Post subject: | Re: ab gsr 2.0l 12v dash swap |
You can't re-map the cordia ECU, best bet is an aftermarket ECU. |
Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |