| Cordia Forum https://www.cordiapower.com/forum/ |
|
| Rear subframe https://www.cordiapower.com/forum/viewtopic.php?f=4&t=17652 |
Page 1 of 1 |
| Author: | d_nikiforides [ 25 Nov 2014, 21:45 ] |
| Post subject: | Rear subframe |
Hi all. SO my rear trailing arms are loose. I assume there is a bearing/bush/something inside where the trailing arms atach to the rest of the subframe. Now heres the deal, I have a full spare GSR subframe I'm going to swap in. But want to replace all these first. Does anyone know the details on what needs replacing and where to get? Thanks guys  Let me know.
|
|
| Author: | Bitza [ 25 Nov 2014, 21:49 ] |
| Post subject: | Re: Rear subframe |
The internet is your friend, the trailing arm bushes are the same as the colt (so I believe) |
|
| Author: | d_nikiforides [ 25 Nov 2014, 21:56 ] |
| Post subject: | Re: Rear subframe |
Ah thanks andrew. Looked for Colt and came up with MB110430. Sorry I probably should have looked harder. Decided gonna do a few things while at it. -The Rear trailing arm bushes obviously. -Rear bearings and Drums. -Front bearings (running Sonata front Hubs due to very large calipers/discs, bigger then magna), as I noticed I have a bit of play. -Some drilled discs. -Fitting of the GSR rear subframe with the swaybar. Should spruce up a bit. Its gotten a bit loose. But I've already done the front bushes. So all should be good after that
|
|
| Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|