Cordia Forum https://www.cordiapower.com/forum/ |
|
Mpi conversion help https://www.cordiapower.com/forum/viewtopic.php?f=4&t=16684 |
Page 1 of 1 |
Author: | 11scordia [ 15 Nov 2011, 20:56 ] |
Post subject: | Mpi conversion help |
Hi yall doing an mpi conversion with a microtech ltx 8 i just need to know what of the original cordia computer system remains ie ecu boost pressure sensor knock sensor resistor for the coil any info would be helpful Regards Myles |
Author: | Bitza [ 15 Nov 2011, 21:59 ] |
Post subject: | Re: Mpi conversion help |
Is this model sequential fuel with ignition pick up or dual sequential ignition or fuel only? |
Author: | 11scordia [ 15 Nov 2011, 23:09 ] |
Post subject: | Re: Mpi conversion help |
Does both |
Author: | Bitza [ 15 Nov 2011, 23:14 ] |
Post subject: | Re: Mpi conversion help |
If it does both the only thing I would keep is the main control relay.............but you will need a dizzy to fire the ignition (Galant) or use it fuel only and keep the cordia ignition. |
Author: | esky [ 15 Nov 2011, 23:37 ] |
Post subject: | Re: Mpi conversion help |
if using microtech as fuel only then you can wire the ignition like this http://www.cordiapower.com/forum/viewtopic.php?f=4&t=15930 this was for my wolf 3d if you have the galant dissy then you then you have more options. is the lt8 set up for single coil or multicoil ( i believe this can only be changed by MT, i know mine is) and is it set for a cordia or a different car? you may have to talk to MT |
Author: | 11scordia [ 16 Nov 2011, 00:58 ] |
Post subject: | Re: Mpi conversion help |
Well i have the sonata dizzy the loom it already set up for the microtech but the bloke who ownd it before me so i dont know wats been hacked up |
Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |