| Cordia Forum https://www.cordiapower.com/forum/ |
|
| 4g32 4g33 4g37 crankshaft interchange https://www.cordiapower.com/forum/viewtopic.php?f=4&t=16675 |
Page 1 of 1 |
| Author: | PharmD [ 10 Nov 2011, 05:47 ] |
| Post subject: | 4g32 4g33 4g37 crankshaft interchange |
Hi, I have a 4g32 engine from a Bobcat that spun a rod bearing and chewed up the crankshaft. I've searched all over the internet for a 4g32 crank to no avail. What I have come across is that the block to the 4g37, 4g33 are the same as the 4g32 only with different bores. My question is, would the crankshafts be interchangeable between these engines since the stroke is the same? My crank from the 4g32 has the 5 bolt holes for the flywheel like the 4g33 and 4g37. Would a crank kit for say a 1993 Eclipse with a 4g37 fit a 4g32 engine block? Thank you for any help, I greatly appreciate it. |
|
| Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|