| Cordia Forum https://www.cordiapower.com/forum/ |
|
| 4 spot calipers https://www.cordiapower.com/forum/viewtopic.php?f=4&t=16463 |
Page 1 of 1 |
| Author: | darren [ 27 May 2011, 19:07 ] |
| Post subject: | 4 spot calipers |
Hi guys Just wondering if anyone knows where to get some 4 spot calipers for my AB GSR? Also what are they worth? |
|
| Author: | Bitza [ 27 May 2011, 20:24 ] |
| Post subject: | Re: 4 spot calipers |
I wouldn't bother unless you are running BIG power...........it takes ALOT of modification to fit them. |
|
| Author: | darren [ 27 May 2011, 20:33 ] |
| Post subject: | Re: 4 spot calipers |
Thanks for the heads up!!! what would u sugest? |
|
| Author: | Bitza [ 27 May 2011, 20:36 ] |
| Post subject: | Re: 4 spot calipers |
Put a set of AC knuckles, rotors and calipers on the GSR........or covert to TM - TP magna.........you can also use the magna rears on the cordia. Plenty for day to day braking. |
|
| Author: | amr [ 28 May 2011, 12:05 ] |
| Post subject: | Re: 4 spot calipers |
Would darren need to change the booster or master cyilinder? |
|
| Author: | Bitza [ 28 May 2011, 12:20 ] |
| Post subject: | Re: 4 spot calipers |
When I undertook this conversion I also replaced the boost and master cylinder to magna..........it's a straight swap, but you need to plug the underside two lines in the master and use the side ones..........other guys on here still run the cordia gear............but I found once the rears were completed the brake pedal wasn't as high due to the rotor size was larger than the booster. At the moment I run the 3000GT brakes with TL magna booster and master. |
|
| Author: | coop1er [ 28 May 2011, 17:29 ] |
| Post subject: | Re: 4 spot calipers |
Ideally you want to use the smallest master cylinder possible that will supply enough volume of fluid to the brakes. Changing caliper size or changing from drum to disc brakes alters the bias and not always in a better way. |
|
| Author: | darren [ 28 May 2011, 21:30 ] |
| Post subject: | Re: 4 spot calipers |
Cool ill get a tp booster and m/cylinder when i get all the other stuff. Thanks for all your help. Will my magna elites still fit? |
|
| Author: | Bitza [ 28 May 2011, 21:35 ] |
| Post subject: | Re: 4 spot calipers |
If they fit a magna they will fit your cordia. |
|
| Author: | ssb2005 [ 09 Jul 2011, 18:52 ] |
| Post subject: | Re: 4 spot calipers |
what sort of 4 pots are you planning on putting on there? |
|
| Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|