will be using copper gasket my intention is to boost it up as much as i can.
just wondering if anyone can tell me the best torque specs .
| Attachments: |
|
51.jpg [ 165.47 KiB | Viewed 26250 times ] |
| Cordia Forum https://www.cordiapower.com/forum/ |
|
| Cordia head bolts https://www.cordiapower.com/forum/viewtopic.php?f=3&t=21193 |
Page 1 of 2 |
| Author: | fernandothecarguy [ 01 Jul 2017, 12:26 ] |
| Post subject: | Cordia head bolts |
yes will be replacing head bolts. that's what i been advised . original bolts looks good but my son says NO good either i do job right or don't do it at all . im having troubles finding 4g62 HB. left few emails on sellers but so far got no reply? im not sure if this will go on g62 http://www.ebay.com.au/itm/Mitsubishi-L ... 1360561248 |
|
| Author: | fernandothecarguy [ 01 Jul 2017, 12:40 ] | ||
| Post subject: | Re: Cordia head bolts | ||
will be using copper gasket my intention is to boost it up as much as i can. just wondering if anyone can tell me the best torque specs .
|
|||
| Author: | Bitza [ 01 Jul 2017, 13:26 ] |
| Post subject: | Re: Cordia head bolts |
That is not a 62 head gasket........piston size is 82mm for the cordia and 85mm for the 2 litre.......you will blow this gasket as the fire rings are nowhere near the cylinder. Re-using the head bolts is fine, they are not torque to yield bolts. |
|
| Author: | fernandothecarguy [ 01 Jul 2017, 21:04 ] | ||||
| Post subject: | Re: Cordia head bolts | ||||
how can you tell by looking at a picture? i compared it with a brand new 62 hg and its exact size. the black gasket came out of vrs kit:DH061/2. you can check here: http://www.ebay.com.au/itm/HEAD-GASKET- ... xy4eJTOjuq i bought this a while ago my intention to build my 62. here some pics
|
|||||
| Author: | fernandothecarguy [ 01 Jul 2017, 21:14 ] | ||
| Post subject: | Re: Cordia head bolts | ||
spent over 200 dollars on the copper gasket  my son says normally when bolts are torque down in +90 degrees will need replacing . but his confused now. got torque specs here
|
|||
| Author: | Bitza [ 02 Jul 2017, 15:08 ] |
| Post subject: | Re: Cordia head bolts |
Here is a pic of a standard gasket, you can see the fire rings are not round, they have a relief in them for the inlet and exhaust valves.......are you sure your head gasket is 82mm? 
|
|
| Author: | fernandothecarguy [ 02 Jul 2017, 18:56 ] | ||
| Post subject: | Re: Cordia head bolts | ||
i see what you mean now . i have measured it says 85mm. i have sent email to the company i bought the gasket. just waiting on reply. mean while took pic of gasket. you can see very small gap between bore and firering. im disappointed. these people guarantee the gasket to fit.
|
|||
| Author: | fernandothecarguy [ 02 Jul 2017, 19:37 ] |
| Post subject: | Re: Cordia head bolts |
where can i get 62 hg ? all i see 62 is same 63 
|
|
| Author: | Bitza [ 02 Jul 2017, 20:03 ] |
| Post subject: | Re: Cordia head bolts |
All I can say is get a composite OEM one from Mitsubishi. |
|
| Author: | fernandothecarguy [ 03 Jul 2017, 12:29 ] |
| Post subject: | Re: Cordia head bolts |
Hi Fernando thank you for purchasing one of our gaskets. we understand your concerns . we made this gasket so it would suit many applications not just for Mit 4G62 or 4g63. this High Performance Street, Mild Race, for high Boost or Nitrous. It's not your normal cheap gasket. is has warranty as long as its been installed by license mechanic . |
|
| Author: | fernandothecarguy [ 03 Jul 2017, 12:40 ] |
| Post subject: | Re: Cordia head bolts |
called Mitsubishi they can't help me as they don't stock these gaskets any more. they gave me part numbers. MD040532 MD189978 goggle it found this https://www.alibaba.com/product-detail/ ... 34522.html picture looks right |
|
| Author: | fernandothecarguy [ 03 Jul 2017, 14:39 ] |
| Post subject: | Re: Cordia head bolts |
ok today is my day off and what am i doing chasing up head gaskets. this is the reason my wife calls me mad  ok found out we make this gasket in oz brand Permaseal. you can purchase them in Burson or repco 45 dollars its 82mm perfect  now i got 2x4g63 head gaskets for sale |
|
| Author: | 4cylturb [ 03 Jul 2017, 16:29 ] |
| Post subject: | Re: Cordia head bolts |
If you have the part number you can always try Amayama. https://www.amayama.com/en/part/mitsubishi/md189978 I've bought from them and they are pretty good. Otherwise regularly search ebay for a regrind kit, especially US ebay, as they can come up very cheap due to no one buying their surplus stock. I once got a full gasket set for a 4G62 rebuild for $60 posted, but that was many years ago. Here you go. quick search of ebay, there's one in Victoria for $33 http://www.ebay.com.au/itm/Mitsubishi-Cordia-Starion-Galant-Express-L200-L300-Nimbus-Head-Gasket-4G62-4G63-/291866095661 |
|
| Author: | 4cylturb [ 03 Jul 2017, 16:37 ] |
| Post subject: | Re: Cordia head bolts |
Here's another mob that sell them. http://www.precisionintl.com/Engine.aspx?ID=1230&EID=3190 This should work too plus you get all the gaskets http://www.ebay.com.au/itm/VRS-HEAD-GASKET-KIT-DH061-FOR-MITSUBISHI-4G62-SOHC-L300-SB-SC-SD-81-85-/301882028923 Another full kit in NSW http://www.ebay.com.au/itm/VRS-CYLINDER-HEAD-GASKET-SET-KIT-MITSUBISHI-CORDIA-4G62-T-06-1983-1987-DL452-/182415473763?_trksid=p2385738.m2548.l4275 |
|
| Author: | 4cylturb [ 03 Jul 2017, 16:39 ] |
| Post subject: | Re: Cordia head bolts |
Some good prices here mate for things you might need http://www.myshopping.com.au/PT--171_Auto_Parts_Cordia_Mitsubishi__fs_63619_63681_e__ |
|
| Author: | 4cylturb [ 03 Jul 2017, 16:40 ] |
| Post subject: | Re: Cordia head bolts |
Personally i wouldn't touch that alibaba headgasket with a ten foot pole |
|
| Author: | fernandothecarguy [ 03 Jul 2017, 19:57 ] |
| Post subject: | Re: Cordia head bolts |
lol most gaskets your talking about are for 2L specially ebay. you would need to ask what size fire rings . cause they say 63 is same as 62 i did a lot of ringing around. alibaba gaskets are good 2 years warranty but can't buy just one . again i had to contact them about size there 81.5mm . picking up 1 from burson brand Permaseal F/R 82mm is good brand Australian owned. http://www.aagaskets.com.au/about.aspx i trust anything made here the vrs kit from ebay i rang UltraCheapAuto spoke to Sharon very nice and helpful person there i explained gasket is not right for 62 gave them a picture of andrew gasket as well as the size f rings. at first it was like i don't know what im talking about ,then i gave them the Mitsubishi part number they started checking and apologized . they are correcting the problem now i did a lot of running around today hope someone will use this information |
|
| Author: | Bitza [ 03 Jul 2017, 20:44 ] |
| Post subject: | Re: Cordia head bolts |
Well done guys, lots of useful information here. |
|
| Author: | 4cylturb [ 04 Jul 2017, 21:45 ] |
| Post subject: | Re: Cordia head bolts |
That sucks really. Andrew, is the 4G62 sohc head gasket the same as the 4G63 sohc headgasket? I thought they were the same but i guess they're not according to Fernando's research. |
|
| Author: | Bitza [ 05 Jul 2017, 15:57 ] |
| Post subject: | Re: Cordia head bolts |
No, they are different. |
|
| Page 1 of 2 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|