I'm going down to Calder Park to finally put my car down the 1/4 mile.

If anyone is interested in a cruise there, or even chucking your car down the 1/4 mile aswell, let us know.

It'll either be on Fri 30th Jan, or Fri 6th Feb (depending on weather etc.)

It costs $55 to run.
Each car is checked before they can run (battery is secure, enough coolant in overflow reservoir, no oil/water leaks). You also need a helmet.
Anything i have missed, let me know!

Cheers,
Peter.

Could be a goer, what time were you planning on leaving? I finish work at like 5, get home at 6ish which is a bit of a biatch but I might be able to go home early or something.

Rob

_________________
~8v 4G63 AC GSR
FMIC
2.5" exhaust
K&N air filter
Modified AFM
Re-Graphed dizzy
rear KYB struts
110.6wkw @ 13.3psi

~1999 Honda VFR800

good luck, tell us how u go

_________________
vr4 power going to waste... how depressing

I just found out that on the 30th I have a RDO so no work equals drags at Calder!

Rob

_________________
~8v 4G63 AC GSR
FMIC
2.5" exhaust
K&N air filter
Modified AFM
Re-Graphed dizzy
rear KYB struts
110.6wkw @ 13.3psi

~1999 Honda VFR800

i'd like to but i am racin my speedway car on the 1st of feb so i will be busy gettin it ready and drivin to droin

It says to be there around 5-6pm, but i have to confirm it.

I'll find out details by sunday and we'll organise it hopefully then.

hehe, i'm suprised how a cordia gets past the no oil/water leaks rule..i'm out then for now at least..

Dylan

_________________
Is there anything better in life than boost...??

Friday 6th Feb will be the day... as long as it doesn't rain.

Oil and water leaks shouldn't be a problem by the 6th. Hopefully

Be good to have another 'CON' on the 6th, starting off going to the calder meet.

Cheers.

Hey Pete,

Dammit, I nearly have my car ready for action. Got a couple of new tyres and everything. Gonna fix the injector seals today.

Ahh well next week is kinda better from the cash POV anyway.

Alex

Did you fix the timing/missing prob Alex?

_________________
~8v 4G63 AC GSR
FMIC
2.5" exhaust
K&N air filter
Modified AFM
Re-Graphed dizzy
rear KYB struts
110.6wkw @ 13.3psi

~1999 Honda VFR800

i might go, maybe, im doing the same times each time so i might wait till i have done some thing else. if anyone has a front mount kit for sale in vic send me some details in a pm

ok. I aint goin racing now due to not haveing the parts for my suspension setup ready to fit and make it to race day. so i'm thinkin calder could be fun get a few of my commodore lovin mates up to see the cordias got, let me knoe whats happenin



matt
0423 859 114

cool pete, i'm pretty sure ill be there, i havent seen a cordia run a 1/4 properly yet so will be a learning thing too for me....

Dylan
0411149765 if anything needs to be told...

_________________
Is there anything better in life than boost...??

Hey Rob,



The missing was caused by the screw on top bit of a spark plug coming off and getting stuck in the ignition leads. All fixed now. Timing nicely set at 14 BTDC

Got a couple of other little things to fix - thought the injector seals were sweet but they are fukking leaking again!

Alex

Is anybody racing at Calder this week?

I planned to, but I just can't fix my fudging injector seals. Three sets now and none have worked.

I don't plan on running but i do wanna come watch if pete and some others are..

Alex, glue the seals in place and to the injectors with a windscreen adhesive...sounds dodgy i know, works a reat tho...just don't get fuel on it till it's set a bit...

Dylan

_________________
Is there anything better in life than boost...??

These are the times for tomorrow at Calder:

Cars to be checked: between 5 and 8pm.
Drags: 6pm - 10:30pm.

I should be there by around 5-5:30, hope to see you guys there on the night.

Cheers,
Peter.

is there someplace we can catch up or do us spectators just have to hang outside and watch......

0411149765, i'll be there and even just ot have a chat afterwards...

Dylan

_________________
Is there anything better in life than boost...??