I found another site that has our pics.
MY car, again-You can see my new rims
Low n sxc cordia-Full view
sleeping giant are in them-Full view.
CAn sum1 link them,look in the drags.4.5.05- 11.5.05-27.5.05
http://www.cacklingpipes.com

yeah ill link the pics

_________________
The only way to discover the limits of possible is to go beyond them into the impossible.
VR4.Wolf 3D.VL-T fuel pump.hybrid 600x300x100.2.5" piping.TD06 167fwkw 15psi

_________________
The only way to discover the limits of possible is to go beyond them into the impossible.
VR4.Wolf 3D.VL-T fuel pump.hybrid 600x300x100.2.5" piping.TD06 167fwkw 15psi

et'/ 60foot/trapspeeds times did ya'll run

look in wsid in cruise and events for the 4/5 they are all in there

_________________
1984 aB cOrDiA gSr, Rx7 iNtErCoOlEr, LoWeReD, TyPe 1 BoV, 5" cAnNoN, RaCeR tEcH 7 CoLoUr BoOsT gAuGe, MoToR sPoRt TuRbO tImEr, 16" EnKaI MaGs, x2 AvAlAnChE 6 x 9's, SoNy 6", SaNsUi 12" SuB, bOsS 1000 wAtT aMp, KeNwOoD hEaDuNiT

I think that falcon is a 98 model,not a 89/90 like i mentioned.

i see 2 falcons... 1 is a ute, otehr sedan.. both are white... the ute would be XE series? probaby... sedan, would be like, 94 i think... meh....

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

The white sedaan thats no ordinary 6 cylinder,its got a fat turbo in the engine bay,it runs 13.5s,the ute is the car that i have beaten,yeah .

Why does the top car have three different kinds of wheels on it?

_________________
'88 Eterna ZR4
'86 Cordia GSR

dont think that ute is an xe. looks like a later model to me.

_________________
Cordia owner again in 1 day....

How funny,sum1 finally spotted my wheel combo.My momos in the rear are 16 inch,205s,i can fit on front,but it doesnt sit flush on hub,cos the bolt heads on hub are in the way approx 6 mm,so i put them on rears for show,front left factory cordia wheel,front right my 195,its the bigest wheel i have that fits,so i only put on rigth hand side cos its the power wheel,but it still breaks traction.I have two 195,two 205,other cordia wheels are on my colt.

fark... ever think of getting like, matching rims/tyres??? i was thinkin those were from different days or something... jeez...

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

What you do about the wheels, is you replace the hub bolts with cap screws (allen head bolts) then you get the mag, get some holes drilled in it at 4x100 pcd.

_________________
‘85 AA Cordia
All in bits!
On the road soon, terrorising your local neighborhood!
http://www.cardomain.com/id/samuel_cordia

1980 EX lancer EX2000 replica.

thats a good idea,once i get them to sit right up,my traction issues will be no more.

you're a freak man.. haha! driving with diff size rims on the front... and two diff sized wheels on the back...

so all up (according to the pics), you got 2 x 13's, 1 x 15" and 1 x 16".. all on the car at the same time?

Its actually, 1x13s, 1x15s, 2x16s.Im gonna change the imbred combo soon.

is that not your car in the first 2 pics? According to the pics you've got a 13" cordia wheel on the front passenger side and rear drivers side, a 15" Sigma GSR wheel on front drivers side, and a random other wheel on the rear passenger side...

The top and second photo were done at diffrent meets,the top photo is the recent pic with my wheels.

hmmmmm......he got you there

_________________
1984 aB cOrDiA gSr, Rx7 iNtErCoOlEr, LoWeReD, TyPe 1 BoV, 5" cAnNoN, RaCeR tEcH 7 CoLoUr BoOsT gAuGe, MoToR sPoRt TuRbO tImEr, 16" EnKaI MaGs, x2 AvAlAnChE 6 x 9's, SoNy 6", SaNsUi 12" SuB, bOsS 1000 wAtT aMp, KeNwOoD hEaDuNiT

Until i can find sum1 who would grind away matierial from my 205/16 inch momos,i will have them in the front to provide ultimate traction,then ill put the light 13 inch factory cordia wheels in the back.