Cordia Forum https://www.cordiapower.com/forum/ |
|
Cordia Convertible turbo restauration Update 4-12-2016 https://www.cordiapower.com/forum/viewtopic.php?f=12&t=17657 |
Page 6 of 6 |
Author: | Convertible Boy [ 28 Dec 2016, 05:28 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
The sub frame is in the black powder coating, the result are very nice. |
Author: | Convertible Boy [ 01 Jan 2017, 01:43 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
My last work for 2016. pfffff Everybody a happy new year ******2017***** |
Author: | Convertible Boy [ 15 Jan 2017, 11:45 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
I am very happy whit the result, the body is hard now, no rust and I made it peace by peace complete. In the left rear corner is the panel around the light wrong but I fix it. |
Author: | Convertible Boy [ 06 Feb 2017, 09:39 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
The left big panel is made on the good location. That panel is almost ready. |
Author: | 4cylturb [ 07 Feb 2017, 23:06 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
What's the purpose of the tent pegs welded on? |
Author: | Convertible Boy [ 08 Feb 2017, 04:36 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
The sandblaster have destroy pieces of metal, now I can the sheet metal Drawing on the right place. It's a small tool. |
Author: | S1VART [ 08 Feb 2017, 12:48 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
do you know of any others around at all ? |
Author: | TheChosen1 [ 10 Feb 2017, 15:35 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
I hate to say it, but the sand blasting person has literally destroyed the car. The whole car has ripples, and is distorted everywhere. Panel thickness of the whole car may be thinner aswell etc. Your gonna need to bog every single panel, literally, unless you get 2nd hand front panels and second hand rear 1/4 panels. You should actually sue the person. I hope to god you didnt pay the idiot that did the job. Clearly the person had no brains when doing it. You shouldnt have paid the company that did it. I would have contested paying if that was me, cos the whole car is beyond repairing now. |
Author: | 4cylturb [ 12 Feb 2017, 20:53 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
Settle down there chosenone. He's in Holland. Life's not all about cars once you get back from the cafe over there. Plus he doesn't look like the sort of bloke who's in a rush or is afraid of doing some hard work. I'm sure he'll sort it out. |
Author: | Convertible Boy [ 15 Apr 2017, 03:34 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
It's still here but I am very busy whit the convertible. Look at the photo's and you know enough. |
Author: | 4cylturb [ 15 Apr 2017, 11:37 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
Good to see your still at it. It's one hell of a project that's for sure. |
Author: | Convertible Boy [ 16 May 2017, 05:27 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
Author: | TRQ-STR [ 16 May 2017, 23:35 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
Is that part in the last pic 3d printed? |
Author: | Convertible Boy [ 18 May 2017, 05:56 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
Yes, he made it whit a 3-D printer. |
Author: | Wexx [ 18 May 2017, 21:28 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
Great work so far! |
Author: | TRQ-STR [ 19 May 2017, 21:54 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
Looks great! Was the print in Pla or Abs? If you ever need high quality abs prints for those summer in cabin temps, just send through the stl files. I'd be happy to help. |
Author: | Convertible Boy [ 24 May 2017, 05:51 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
I don't know. TRQ-STR wrote: Looks great! Was the print in Pla or Abs?
If you ever need high quality abs prints for those summer in cabin temps, just send through the stl files. I'd be happy to help. |
Author: | Convertible Boy [ 05 Jun 2017, 01:31 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
Author: | S1VART [ 23 Feb 2019, 20:55 ] |
Post subject: | Re: Cordia Convertible turbo restauration Update 4-12-2016 |
amazing work, love every minute of this restoration |
Page 6 of 6 | All times are UTC + 10 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |