It is currently 28 Mar 2024, 23:46

All times are UTC + 10 hours [ DST ]




Post new topic Reply to topic  [ 163 posts ]  Go to page 1, 2, 3, 4, 5 ... 9  Next
Author Message
 Post subject: FRONTN
PostPosted: 19 May 2007, 20:38 
Offline
Super Cordia Guru
Super Cordia Guru
User avatar

Joined: 21 Nov 2003, 10:44
Posts: 704
Location: Hillside, Vic
Gender: Male
Your car: FRONTN
Ahh since i've been discovered i might as well show you all my top secret project from area 51 (my backyard) haha..
Anyways most of you may not know me but i've been on these forums since Nov 03 before i even got my 1st Cordia.
I've purchased heaps of parts from all you forum members, even interstate and thru ebay.
I had alot of problems with my first cordia and always wanted a VR4 engine. But after looking i found a VR4 engine that came with a free car lol.
I ended up purchasing this car which used to belong to Zoran from geelong. Featured on fullboost.
http://www.fullboost.com.au/feature_car ... Id=447&p=1
Pretty quick car.. since then i've just been trying to make her look good.. and adding extra parts.
currently incomplete and haven't driven her for over a year.


FRONTN

Japspec VR4 4G63BT DOHC
Cyclone intake manifold - Now Galant NA intake
TD05 14B - Now Evo 7 RS Turbo
450cc injectors - Now 560cc (Evo 8)
Hybrid copy 600x300x70mm Intercooler - 2" hot/2.5" cold
2.5" Exhaust - Now 3" with Custom Dump, middle muffler Hiflow Cat, Veilside muffler
Microtech MT8 with Handset - Now Microtech LT8S
17 x 7" White HR Racing Rims - Now 17 x 7" Buddyclub P1's +35 offset 215/40 tyres
Monroe Front and rear shocks - Now Ultima (Don't Ask)
Pedders lowered Springs - Now lowered King Springs
Turbosmart type 2 BOV - Now Tomei Plumback
Grumbly strut brace.
Brakes F: Evo 2 calipers, RDA 276mm slotted rotors
Brakes R: TP Magna calipers, RDA 256mm slotted rotors. Maxistop pads all round.

AC Cordia interior
EL Dials
Power windows
Momo Jet Steering wheel
Momo Jet Gear knob

No Stereo yet..

Image

Image

Let me know wat you guys think...
Cheers
Tim

_________________
FRONTN-Cordia GSR |Tim|
|VR4 4G63BT|MicroTech LT8S|E7RS 9.8T TD05HR|560cc|Buddyclub P1|White on white||evo 2 brakes|
167fwkw @ 8200rpm 400nm (16psi)


PS: Lol @ spell check, it doesn't even know what a "Cordia" is.


Last edited by FRONTN on 15 May 2009, 04:15, edited 2 times in total.

Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 20 May 2007, 02:53 
Offline
Moderator
Moderator
User avatar

Joined: 08 Aug 2004, 21:18
Posts: 3187
Location: Almost there.....
looks noice. 8) like it.

you're going with a pretty crazy setup. i want them brakes.

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done 8)


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 20 May 2007, 03:38 
Offline
Super Cordia Guru
Super Cordia Guru
User avatar

Joined: 21 Nov 2003, 10:44
Posts: 704
Location: Hillside, Vic
Gender: Male
Your car: FRONTN
Thanx D3bb4..
I got them brakes all on ebay.
Front GTO 4pot calipers =
Sold to Brad (EVO85) [edited]
tp wagon rear calipers n 276mm used discs = Cannot use & chucked out [edited]
Now i need those custom brackets and slotted discs. I wish, [edited]

Removed pick of GTO calipers as was sold. [edited]

_________________
FRONTN-Cordia GSR |Tim|
|VR4 4G63BT|MicroTech LT8S|E7RS 9.8T TD05HR|560cc|Buddyclub P1|White on white||evo 2 brakes|
167fwkw @ 8200rpm 400nm (16psi)


PS: Lol @ spell check, it doesn't even know what a "Cordia" is.


Last edited by FRONTN on 15 May 2009, 04:16, edited 3 times in total.

Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 20 May 2007, 11:19 
Offline
Superuser
Superuser
User avatar

Joined: 06 Jan 2007, 11:20
Posts: 144
Are those red calipers really able to fit in a cordia, they look like they can stop a mach truck.

_________________
Transfered Rides from Cordia Gsr to VR4 = Gsr2VR$

Galant is much more modern


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 20 May 2007, 17:39 
Offline
Moderator
Moderator
User avatar

Joined: 02 Mar 2004, 18:03
Posts: 2741
Hot Hot Hot!!

That thing is going to be a monster :lol: ...Love it already


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 02 Jun 2007, 10:08 
Offline
Forum Regular
Forum Regular

Joined: 01 Mar 2007, 23:57
Posts: 37
man thats nice cordia...lovin it, when its gotta be back on the road ?


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 09 Jun 2007, 11:37 
Offline
Super Cordia Guru
Super Cordia Guru
User avatar

Joined: 21 Nov 2003, 10:44
Posts: 704
Location: Hillside, Vic
Gender: Male
Your car: FRONTN
i don't think i'll ever finish this project haha.. i'm so lazy.. and it's too cold..
I just wasted 2 weeks of annual leave..
one day it'll be worth it..
just won some fto seats on ebay for it.. =
sold fto seats for evo 2 recaro's then sold and using AC interior [edited]

_________________
FRONTN-Cordia GSR |Tim|
|VR4 4G63BT|MicroTech LT8S|E7RS 9.8T TD05HR|560cc|Buddyclub P1|White on white||evo 2 brakes|
167fwkw @ 8200rpm 400nm (16psi)


PS: Lol @ spell check, it doesn't even know what a "Cordia" is.


Last edited by FRONTN on 15 May 2009, 04:17, edited 2 times in total.

Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 09 Jun 2007, 12:26 
Offline
Super Cordia Guru
Super Cordia Guru
User avatar

Joined: 26 Sep 2004, 12:42
Posts: 964
Location: Mill Park, melbourne
thats awesome man! very very nice! top effort :)

_________________
I WANT MORE BOOST DANGIT


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 09 Jun 2007, 20:05 
Offline
Forum Regular
Forum Regular

Joined: 01 Mar 2007, 23:57
Posts: 37
Timmeeee wrote:
i don't think i'll ever finish this project haha.. i'm so lazy.. and it's too cold..
I just wasted 2 weeks of annual leave..
one day it'll be worth it..
just won some fto seats on ebay for it..


haha, i kinda had same thing but i just had to do it..i just dont feel like working on my car..it sucks working in cold your hands just get soo weak...and hurt ur self more lol

but good luck with your project mate


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: 10 Jun 2007, 09:26 
Offline
Moderator
Moderator
User avatar

Joined: 29 Jan 2007, 20:05
Posts: 1454
Location: Kerang Victoria Australia
looking good.... you had better get a wiggle on.. the melb cruise is creeping up fast.. hehe

nice to see another ebayaholic out there ;)

j

_________________
Quench my thirst with gassoline!


Top
 Profile  
Reply with quote  
 Post subject: Re: FRONTN
PostPosted: 10 May 2008, 23:57 
Offline
Super Cordia Guru
Super Cordia Guru
User avatar

Joined: 21 Nov 2003, 10:44
Posts: 704
Location: Hillside, Vic
Gender: Male
Your car: FRONTN
I haven't updated this in awhile but since this is the main update on the car i thought i'd post again..
I have finally sprayed the car.. i'm not really happy with it but oh well it's solid 2pack white so i can rub down a lil and buff it up.. so should be okay.. here's some pics.. wet paint always looks good..


ImageImageImage
ImageImageImage

_________________
FRONTN-Cordia GSR |Tim|
|VR4 4G63BT|MicroTech LT8S|E7RS 9.8T TD05HR|560cc|Buddyclub P1|White on white||evo 2 brakes|
167fwkw @ 8200rpm 400nm (16psi)


PS: Lol @ spell check, it doesn't even know what a "Cordia" is.


Last edited by FRONTN on 15 May 2009, 04:17, edited 1 time in total.

Top
 Profile  
Reply with quote  
 Post subject: Re: FRONTN
PostPosted: 11 May 2008, 02:28 
Offline
1800 CORDIA
1800 CORDIA
User avatar

Joined: 25 Mar 2006, 13:40
Posts: 1093
Location: Melbourne
Your car: UFO
yay!!!. :lol: lookin good, but u took your sweet ass time aye.

ill have to come past and see it some time soon.
ill come over in my new car to motivate you a little, it might speed up the processes.

_________________
|VR4 4G63 RS|MicroTech lt8s|Ported TD06sl2-25g|Ported & Polished Head|HKS Front Mount|3" Exhaust|
|Coilovers|Swaybars|VR-4 2pot Calipers|TP rears|Evo3 Master/Booster|Evo 3 front bar|Side Skirts|Rear Lip|


Top
 Profile  
Reply with quote  
 Post subject: Re: FRONTN
PostPosted: 20 May 2008, 23:07 
Offline
Super Cordia Guru
Super Cordia Guru
User avatar

Joined: 21 Nov 2003, 10:44
Posts: 704
Location: Hillside, Vic
Gender: Male
Your car: FRONTN
Guys take 2 of painting as i wasn't satisfied with the first job.. This time with a clear coat too.
I reckon it turned out pretty good. It almost doesn't look real coz it's so shiny..(pic was taken with dried paint).
Well atleast i got off my asss and done something about my car haha..

Koray not much to see yet. just a painted shell. bad interior and engine bay still lol.


Image
Image

_________________
FRONTN-Cordia GSR |Tim|
|VR4 4G63BT|MicroTech LT8S|E7RS 9.8T TD05HR|560cc|Buddyclub P1|White on white||evo 2 brakes|
167fwkw @ 8200rpm 400nm (16psi)


PS: Lol @ spell check, it doesn't even know what a "Cordia" is.


Last edited by FRONTN on 15 May 2009, 04:18, edited 1 time in total.

Top
 Profile  
Reply with quote  
 Post subject: Re: FRONTN
PostPosted: 21 May 2008, 09:22 
Offline
Moderator
Moderator
User avatar

Joined: 08 Aug 2004, 21:18
Posts: 3187
Location: Almost there.....
Very nice work!!!

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done 8)


Top
 Profile  
Reply with quote  
 Post subject: Re: FRONTN
PostPosted: 21 May 2008, 09:39 
Offline
Forum Regular
Forum Regular

Joined: 19 May 2008, 22:25
Posts: 94
Location: Geelong
shit nice work mate, Zoran used to do alot of work round Geelong and even on some of my cars. I had always heard of this phantom cordia that was quick as lightning but never managed to see it in the flesh. Keep up the good work!!!

_________________
In boost we trust!


Top
 Profile  
Reply with quote  
 Post subject: Re: FRONTN
PostPosted: 21 May 2008, 20:42 
Offline
Super Cordia Guru
Super Cordia Guru
User avatar

Joined: 21 Nov 2003, 10:44
Posts: 704
Location: Hillside, Vic
Gender: Male
Your car: FRONTN
Ahh yehh this was zoran's cordia. I've never actually met him but talked to him on the phone about this car. Twas pretty average when I got it but yes finally getting looks to match it's go!!. Few yrs back i got a 13 flat with a gtech, but they're never accurate, zoran did get a 13 flat at calder tho..
eclipz if you're round my area come check it out if you like..
Still along way to go as will be trying a reverse turbo setup with an evo 7 rs turbo 9.8T.
I'll be making my own manifold soon.. and needing bigger brakes..

_________________
FRONTN-Cordia GSR |Tim|
|VR4 4G63BT|MicroTech LT8S|E7RS 9.8T TD05HR|560cc|Buddyclub P1|White on white||evo 2 brakes|
167fwkw @ 8200rpm 400nm (16psi)


PS: Lol @ spell check, it doesn't even know what a "Cordia" is.


Last edited by FRONTN on 15 May 2009, 04:18, edited 2 times in total.

Top
 Profile  
Reply with quote  
 Post subject: Re: FRONTN
PostPosted: 21 May 2008, 22:24 
Offline
Forum Regular
Forum Regular

Joined: 19 May 2008, 22:25
Posts: 94
Location: Geelong
ey mate, once i get my cordia on the road and my license back ill be sure to check it out. how hard was it to modify the front bar?

_________________
In boost we trust!


Top
 Profile  
Reply with quote  
 Post subject: Re: FRONTN
PostPosted: 22 May 2008, 00:22 
Offline
Super Cordia Guru
Super Cordia Guru
User avatar

Joined: 21 Nov 2003, 10:44
Posts: 704
Location: Hillside, Vic
Gender: Male
Your car: FRONTN
front bar took a while it wasn't hard.. just playing with plastic putty before i knew how to fibreglass. I ended up selling the front bar to oggy, he's down your way in colac tho.. I still gotta check up on his car..
I'll be fibreglassing a new full body kit in soon.. Maybe a trust type front bar.. but already have vertex rear bar n sideskirts in the build.. here's some pics.. along with some goodies waiting to go on. Buddyclub P1's and evo 2 recaro's.

ImageImageImage

ImageImageImage

_________________
FRONTN-Cordia GSR |Tim|
|VR4 4G63BT|MicroTech LT8S|E7RS 9.8T TD05HR|560cc|Buddyclub P1|White on white||evo 2 brakes|
167fwkw @ 8200rpm 400nm (16psi)


PS: Lol @ spell check, it doesn't even know what a "Cordia" is.


Last edited by FRONTN on 15 May 2009, 04:19, edited 1 time in total.

Top
 Profile  
Reply with quote  
 Post subject: Re: FRONTN
PostPosted: 25 May 2008, 00:30 
Offline
Cordia Guru
Cordia Guru
User avatar

Joined: 18 Sep 2007, 05:16
Posts: 395
Location: sydney
I'm so jealous!!! Man i can't wait to see it when it is finished! :D

_________________
Image

http://www.cardomain.com/ride/2541897


Top
 Profile  
Reply with quote  
 Post subject: Re: FRONTN
PostPosted: 25 May 2008, 10:02 
Offline
Super Cordia Guru
Super Cordia Guru
User avatar

Joined: 21 Nov 2003, 10:44
Posts: 704
Location: Hillside, Vic
Gender: Male
Your car: FRONTN
newy vr4 wrote:
I'm so jealous!!! Man i can't wait to see it when it is finished! :D

lol newy.. my car hasn't moved in 2.5yrs! so i'll be trying to get it to run shortly. bodykit has now been put on hold.. shopping for brembo's now..

Image

_________________
FRONTN-Cordia GSR |Tim|
|VR4 4G63BT|MicroTech LT8S|E7RS 9.8T TD05HR|560cc|Buddyclub P1|White on white||evo 2 brakes|
167fwkw @ 8200rpm 400nm (16psi)


PS: Lol @ spell check, it doesn't even know what a "Cordia" is.


Last edited by FRONTN on 15 May 2009, 04:19, edited 1 time in total.

Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 163 posts ]  Go to page 1, 2, 3, 4, 5 ... 9  Next

All times are UTC + 10 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 30 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Connect with Cordia Power on Facebook. Cordia Power 2000-2020. Cordia Forum powered by phpBB.