PBR item ahaha, do it
| Cordia Forum https://www.cordiapower.com/forum/ |
|
| FRONTN https://www.cordiapower.com/forum/viewtopic.php?f=12&t=12234 |
Page 4 of 9 |
| Author: | FRONTN [ 01 Sep 2009, 00:43 ] |
| Post subject: | Re: FRONTN |
guys i finally pulled the box out.. and found out i blew my clutch (4 puck exedy).. i'm awesome!! now gonna get a custom clutch made up.. something good for my heel n toe down shifting and my flat throttle shifting lol!!.. something to handle my instant 400nm of torque.. |
|
| Author: | TRQ-STR [ 01 Sep 2009, 02:08 ] |
| Post subject: | Re: FRONTN |
Get your self an Xtreme 6 puck. Andrew, Brad and I all run these and haven’t had a problem yet. Brad has had his for over 2 years with power up to and above 220kw and I’ve had mine with 600nm at 3.5k rpm for near 8 months and it’s been great. Personally don’t go custom as off the shelf or modified to suite is always cheaper. It will most likely be more money than its worth. If you want the part numbers to the 6 puck Xtreme with MS pressure plate gimi a buzz Koray |
|
| Author: | phaser [ 01 Sep 2009, 20:06 ] |
| Post subject: | Re: FRONTN |
PBR item ahaha, do it
|
|
| Author: | Bitza [ 01 Sep 2009, 20:13 ] |
| Post subject: | Re: FRONTN |
Yes Tim, go the 6 puck..............here's some pics...........won't break this baby! Attachment: Clutch install 001.jpg [ 104.48 KiB | Viewed 30941 times ] Attachment: Clutch install 002.jpg [ 86.44 KiB | Viewed 30941 times ] |
|
| Author: | FRONTN [ 02 Sep 2009, 22:30 ] |
| Post subject: | Re: FRONTN |
haha i snapped a pbr clutch a few yrs ago with the old setup, 14b etc, and now a exedy 4 puck. now i think it's the way i drive.. i usually heel n toe every single time i'm braking.. or maybe due to 'some' flat throttle shifting!.. i'll consider the 6 puck extreme clutch but the way koray (trqstr) described it, it's abit harsh with the "de de de de de" i need to be a lil more street friendly and my mate has come up with a custom clutch he can get from his suppliers so leaning towards that at the moment.. we'll see... soon!! |
|
| Author: | EVO85 [ 03 Sep 2009, 00:03 ] |
| Post subject: | Re: FRONTN |
FRONTN wrote: i usually heel n toe every single time i'm braking.. or maybe due to 'some' flat throttle shifting!.. Ok Timmy makinen lol Go with the xtreme 6 puck arrangement. It's been tried and tested by me and is not too bad on the leg once you get used to it! 
|
|
| Author: | cordiaaaturbo [ 03 Sep 2009, 01:20 ] |
| Post subject: | Re: FRONTN |
see if you can get a refund on the clutch to... if its less than 6 months lol worth a try! |
|
| Author: | JiMi [ 03 Sep 2009, 08:33 ] |
| Post subject: | Re: FRONTN |
lol... i'm sure its done less that 6 months work but its prolly 3 years old with the speed tim gets things done at times at least it aint another box 
|
|
| Author: | TRQ-STR [ 03 Sep 2009, 11:30 ] |
| Post subject: | Re: FRONTN |
lol but so tru at what Jimi said Put it this way Tim, if my cars done before yours (which it probably wont be), you can come take it for a wrap. |
|
| Author: | TRQ-STR [ 03 Sep 2009, 11:48 ] |
| Post subject: | Re: FRONTN |
Forgot to add that the "de de de" could be from the solid engine mounts. Keep in mind that mine has already chewed threw a gearbox (it could have also been from the oil that was in there). Guessing that’s no problem for you anyways as you end up changing them sooner than the clutch is able to do any damage lol. All jokes aside, I must say you heel and toe quite well that shouldn’t be doing any damage. However I don't like the idea of flat throttle shifting. Can’t be good on the clutch. But because of this the name stays Timmy Makinen lol. |
|
| Author: | FRONTN [ 03 Sep 2009, 23:33 ] |
| Post subject: | Re: FRONTN |
hahaha you guys have got me.. brad: yes I am considering getting a 6.5 sometime.. TME timmy makinnen edition! jamie: yes, the clutch has prolly done just over 5k kms all up and yes was used on my last setup so bout 3+ yrs old haha!! koray: no idea as what I will be doing, but I did just get another gearbox (from goran) just incase!. but hoping to chuck in the LSD in that.. you guys should've told me how easy it is to remove a box.. easy as piss.. so how much is one of these 6 puck extreme clutches? |
|
| Author: | cordiaaaturbo [ 05 Sep 2009, 19:43 ] |
| Post subject: | Re: FRONTN |
easy as pis? IT TOOK YOU 3 weeks !! lol dont know cost of the clutch but dosnt sound cheap lol |
|
| Author: | Bitza [ 05 Sep 2009, 20:31 ] |
| Post subject: | Re: FRONTN |
Tim, I purchased my clutch from Adelaide Clutch Services. Total price $570.00.............this included pressure/clutch plate, thrust bearing and flywheel machining. Part numbers: Clutch plate: DM12220202DSB........$188.62 Pressure plate: CM22102MS...........$319.83 Someone asked me this before and purchased the exact same product...........give the guys a call on 08 8300 5000. Hope this helps. |
|
| Author: | cordiaaaturbo [ 05 Sep 2009, 21:14 ] |
| Post subject: | Re: FRONTN |
ahh like i thought, not cheap. |
|
| Author: | TRQ-STR [ 06 Sep 2009, 00:20 ] |
| Post subject: | Re: FRONTN |
Yep, those are the part numbers just make shure you ask for a 6 puck!. The first 1 i recived was a four puk and i sent it back. Not cheap, but you get what you pay 4. I got mine threw a mate for $490 delivered. Though he said next time around it will be $570 as the first time it was shipped with some other guys order. |
|
| Author: | JiMi [ 06 Sep 2009, 10:49 ] |
| Post subject: | Re: FRONTN |
thats not that bad for price... standard heavy duty exedy for the gvr4 was around 500 when i got one 18 months ago.. every other place other than the one i got it from were 700+.. mebbe have a ring around in bendigo tim, thats where i got mine from. cant remember the name though soz |
|
| Author: | cordiaaaturbo [ 06 Sep 2009, 13:52 ] |
| Post subject: | Re: FRONTN |
bgt in dandy do me good prices i'll see what they say |
|
| Author: | EVO85 [ 06 Sep 2009, 20:14 ] |
| Post subject: | Re: FRONTN |
With regard to price, I guess it's all relative. Sure it may cost $500-600 when a relatively standard HD clutch may cost a third of the price... just spare a thought for 4wd owners who can fork out 2-3K on a clutch. IMO, it's a bargain and mine has seen at least 30,000kms (and a lost of abuse) and there's still meat on it. |
|
| Author: | FRONTN [ 23 Sep 2009, 00:00 ] |
| Post subject: | Re: FRONTN |
okay guys my car is once again off the road for another phase.. i got my new clutch from my mate who got it from his supplier: his best description of it is: some organic shit! lol.. this is the checklist of things to do on my car: change head gasket - Cometic change water pump change all gaskets/seals change timing belt n gears - toda belt n tomei cam gears ARP head studs/272 APC cams/HKS valve springs remove balance shaft light porting slightly larger turbo - evo 9 turbo with 20g wheel, may make a new exhaust manifold/dump/oil and water lines. HKS coilovers from evo 6 2 piece vr4 drive shaft LSD in gearbox - Ralliart Don't ask how long this is gonna take, but I do have help this time round haha! Well see how we go! |
|
| Author: | blackGSR [ 23 Sep 2009, 01:12 ] |
| Post subject: | Re: FRONTN |
mmmmmmmmmm.... modified evo 9 turbo....  ^^^^ very sexy parts list!sounds like it's going to be one extreme weapon when it's done! or in other words .... you cordia is gonna be some seriously organic shit! LOL |
|
| Page 4 of 9 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|