Hey guys, just a few pics of my cordia.

Specs are:
VR4 engine running a TD04 turbo
Blue top injectors
Wolf 3D computer and handcontroller
600x300x100 genuine Hybrid intercooler with 2 1/2 inch piping
2" Dose pipe to pod filter
2 1/2 inch exhaust to a 3" cannon
Heavy duty organic clutch
Vl Turbo fuel pump
Bigger throttle body elbow
16" momo wheels with brand new F1 205's
Lowered on Lovell springs
Turbotec boost controller running 10psi
All vac hoses in red silicon hose
Recored radiator, new battery and alternator.
and a few other things i cant think of.
head unit, 6x9's, 6's, fusion 12" sub in box, and audioline amp (thanks baby) to go in.

The car was dynod at 126fwkw on 7psi, now running 10psi and yet to be dynod and tuned again. Runs a bit too rich (mass flames)

Anyway, pics are a bit big and flash on the cam doesnt work. Will get some better ones in the day time during the week.

Regards
Nathan

Yeah i know it needs a grill , lost it on a drive.












Also one of my old cordia i sold, returning it to stock.

_________________
The only way to discover the limits of possible is to go beyond them into the impossible.
VR4.Wolf 3D.VL-T fuel pump.hybrid 600x300x100.2.5" piping.TD06 167fwkw 15psi

LOVING THE CORDIA NATHAN!!!! looks tough, plus the bay looks very clean and tidy (Very Rare for a Cordia). BTW those gauges on ur old cordia's bonnet looked good. You know how i feel abt those seat covers tho GL with it man.... bring on some pics of the interior!

_________________
TopTen

"Dont be silly, I cant afford to eat, I own a Cordia!"

For the best prices on Wheels & Tyres in Sydney head to http://www.toptentyres.com.au

niz, looks like you need some rubber on those tyres too! (rear....) sits a lil high compared to old one aye

shiiiittttttttttttt... that vac leak's gonna be a nasty prick to get at

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

Nice lookin cordia, keep up the good work.

hey looks nice, not sure how the mags suit it tho.


keep up the good work

_________________
2009 Black Xr8 Ute. Boss 290
2001 TM Racing 250EN 2T, HGS, Ohlins, brembos etc
1985 AB GSR. VR-4, LSD, Wolf, 188KW at the wheels FTW!
1984 AB GSR all in bits.
1982 JA Starion
1973 Yamaha RD 250 project cafe racer

Few new pics of the car. Yeah the air leak was a bit hard to get to but that is fixed now and changed the fouled plugs and shes running like a dream. Might get some iterior pics if i get the time guys.

What do youse think?

_________________
The only way to discover the limits of possible is to go beyond them into the impossible.
VR4.Wolf 3D.VL-T fuel pump.hybrid 600x300x100.2.5" piping.TD06 167fwkw 15psi

looks tops mate, dus it have 2 different tail lights or is that just the pic that makes it look like that?
is it at your sydney house?

Nice looking cordia, runnin a bit rich don't ya think?

I was gonna say.... RICH MUCH heheh

Very straight by the look of it. nice

_________________
'70 XW GT, STOCK! (as stock as GT's are)
'94 Silver Evo 2, ross forged pistons, eagle H-Beam rods, Garrett roller bearing turbo, ceramicoated manifold, 272 cams, copper head gasket, 450x300 FMIC, 3" exhaust w/HKS cannon, king springs, 17" rims, Strut brace.

also spot the impact on the LHS of the car..... the under-headlight thingo-ma-bob aint lined up

gotta do somethin bout that stock rear wing......

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

Thanks for the comments guys

Nah josh that way just the angle the pic was taken.

Bitza and Wyda, hell yeah its running rich, ive fouled two sets of plugs in a week. But other than that it goes very well, getting it on the dyno this week hopefully so will let you know how it goes.

Regards
Nathan

_________________
The only way to discover the limits of possible is to go beyond them into the impossible.
VR4.Wolf 3D.VL-T fuel pump.hybrid 600x300x100.2.5" piping.TD06 167fwkw 15psi

i like it how you think your tyres are brand new

_________________
parts needed: malpassi rising rate reg and lotsa work/time
605X405X78 intercooler
D3B4ST8 is almost done

NIZAR

So much to come from this car Can't wait.

Car is very very clean and goes like a rocket and the flutter sounds like a horse on steroids certainly win the Melbourne cup.

But good buy niz take care of it mate and she'll serve you lots of fun Like I said can;t wait to see the new mods.

_________________
So close yet so far.........

doze it uleh

_________________
'70 XW GT, STOCK! (as stock as GT's are)
'94 Silver Evo 2, ross forged pistons, eagle H-Beam rods, Garrett roller bearing turbo, ceramicoated manifold, 272 cams, copper head gasket, 450x300 FMIC, 3" exhaust w/HKS cannon, king springs, 17" rims, Strut brace.

sexy cordia, i like it!
hopefully everything works out for ya cuz, best of luck
n hurry up n get it all fixed up so we can run next 2 each other at wsid

_________________
?