| Cordia Forum https://www.cordiapower.com/forum/ |
|
| Update: Plysha's Cordia (Engine's In!!!) https://www.cordiapower.com/forum/viewtopic.php?f=12&t=14467 |
Page 6 of 9 |
| Author: | smokincordia [ 10 Apr 2011, 14:03 ] |
| Post subject: | Re: Update: Plysha's Cordia |
No cyclone intake? |
|
| Author: | Plysha [ 10 Apr 2011, 16:48 ] |
| Post subject: | Re: Update: Plysha's Cordia |
FRONTN wrote: I'm luving this build. Patience is a virtue. I'm hoping that you're budgetting for an LSD, coz you're gonna need it. Plus it'll handle way better... You might need to rotate the front compressor cover on the turbo... Patience definitely is a virtue mate, so true...I like to use the quote, "Do it once...Do it right!" And for now i know it's almost insane but no LSD...Don't worry though down the track one will be installed along with a rebuilt gearbox. And like Jon posted before, motor was just assembled to check all things line up etc, compressor cover will be rotated so that the cooler lines flow underneath instead of over the top of the exhaust manifold. smokincordia wrote: No cyclone intake? Yea chose to swap it over to the N/A intake manifold, part of this was due to the better flow achieved over the cyclone mani, it also make it a little easier with running the vacume lines. |
|
| Author: | smokincordia [ 10 Apr 2011, 20:20 ] |
| Post subject: | Re: Update: Plysha's Cordia |
Ahh do they outflow the cyclones? Didn't know that. Can't wait to see the dyno figures when it's done!! |
|
| Author: | phaser [ 10 Apr 2011, 22:15 ] |
| Post subject: | Re: Update: Plysha's Cordia |
well done boys! looking good |
|
| Author: | Plysha [ 06 Jun 2011, 03:02 ] |
| Post subject: | Re: Update: Plysha's Cordia |
Sorry for the lack of an update guys, been quiet the last few weeks, not too much has happened...a couple of quick pics of the motor before it goes hopefully this week or the next, just waiting on the injectors to arrive and some other small parts...I've got a few small things to fab up and get ready in the meantime but should have some more pics to come once the motor is in...enjoy for now    
|
|
| Author: | cordiaaaturbo [ 06 Jun 2011, 13:05 ] |
| Post subject: | Re: Update: Plysha's Cordia |
enough with all the forplay lets set some action 
|
|
| Author: | Jon [ 06 Jun 2011, 19:34 ] |
| Post subject: | Re: Update: Plysha's Cordia |
Busy is an understatment for me, I'm struggling to find time. Hopefully in the coming weeks there will be some actual significant progress. |
|
| Author: | smokincordia [ 07 Jun 2011, 00:10 ] |
| Post subject: | Re: Update: Plysha's Cordia |
LOVE that exhaust manifold!!! I think that looks waaaay more schmick than stainless! Nice work. |
|
| Author: | S1VART [ 07 Jun 2011, 17:01 ] |
| Post subject: | Re: Update: Plysha's Cordia |
looks great , I bet your hanging to give it a run |
|
| Author: | Plysha [ 17 Jul 2011, 13:54 ] |
| Post subject: | Re: Update: Plysha's Cordia |
cordiaaaturbo wrote: enough with all the forplay lets set some action Shouldn't be too long now hopefully smokincordia wrote: LOVE that exhaust manifold!!! I think that looks waaaay more schmick than stainless! Nice work. Yea thanks mate, very very happy with it...I was originally going to go for one of the enlarged evo 3 items, however after having looked into this one I realized I could get it for the same price including getting it shipped here from the US. S1VART wrote: looks great , I bet your hanging to give it a run Cheers mate, you couldn't imagine...I'm just looking forward to the day i hear it started up let alone taking it for a spin...still a fair way to go yet |
|
| Author: | Plysha [ 17 Jul 2011, 14:00 ] |
| Post subject: | Re: Update: Plysha's Cordia |
Progress... Motor went in last weekend, very very happy with what Jon has managed to do for me...I know it would have been a pain in the ass to get that motor in with all the solid mounts but loving the results, looks amazing in there...gearbox shouldn't be too far off going in, got plenty of work with all the lines, wiring, hoses etc to come...Here's a couple more pics to wet your appetite lads...more to come...   
|
|
| Author: | cordiaaaturbo [ 17 Jul 2011, 21:41 ] |
| Post subject: | Re: Update: Plysha's Cordia (Engine's In!!!) |
turbo isnt large enough :\ looks great |
|
| Author: | newy vr4 [ 18 Jul 2011, 10:56 ] |
| Post subject: | Re: Update: Plysha's Cordia (Engine's In!!!) |
You should be proud with yourself, it looks pimp! with a 20g.. this going to be a beast! How much did the exhaust manifold set u back? |
|
| Author: | coop1er [ 18 Jul 2011, 12:32 ] |
| Post subject: | Re: Update: Plysha's Cordia (Engine's In!!!) |
This looks really good - I like a clean and subtle look (except for the purple timing belt)
|
|
| Author: | JiMi [ 18 Jul 2011, 19:38 ] |
| Post subject: | Re: Update: Plysha's Cordia (Engine's In!!!) |
like |
|
| Author: | Jon [ 18 Jul 2011, 20:36 ] |
| Post subject: | Re: Update: Plysha's Cordia (Engine's In!!!) |
Water lines, heater hoses, oil lines and fuel lines should all be done by Wed. |
|
| Author: | S1VART [ 19 Jul 2011, 10:53 ] |
| Post subject: | Re: Update: Plysha's Cordia (Engine's In!!!) |
love your work , not that far away now |
|
| Author: | newy vr4 [ 21 Jul 2011, 08:46 ] |
| Post subject: | Re: Update: Plysha's Cordia (Engine's In!!!) |
What throttle body are you running with that n/a intake? |
|
| Author: | Plysha [ 22 Jul 2011, 02:35 ] |
| Post subject: | Re: Update: Plysha's Cordia (Engine's In!!!) |
newy vr4 wrote: You should be proud with yourself, it looks pimp! with a 20g.. this going to be a beast! How much did the exhaust manifold set u back? Cheers mate, yea very happy From memory i reakon it was a little over $300 Aus inc shipping. I can double check that for you, i purchased it from extremepsi.com in the states.coop1er wrote: This looks really good - I like a clean and subtle look (except for the purple timing belt) Haha thanks mate, the belt matches the cam gears, wanted to keep it all hks...I wanted to go for that clean style, nothing over the top, just quality parts that look good on their own. S1VART wrote: love your work , not that far away now I don't reakon i'll ever be finished with this car...everytime i look at it i have another idea i'd like to try...Once the motor is back in ill be looking into going 5stud, widening the body, and changing the gearbox...it's a never ending story! newy vr4 wrote: What throttle body are you running with that n/a intake? It's the original cyclone intake throttle body mate. |
|
| Author: | S1VART [ 22 Jul 2011, 09:49 ] |
| Post subject: | Re: Update: Plysha's Cordia (Engine's In!!!) |
i know what you mean, I want to wide body mine now , maybe run 235 to 245s all round , I have been looking at the 5 stud also , I think the TR TS KR KS front hubs will be fine , but the rear puzzles me as I have looked to hard at it yet |
|
| Page 6 of 9 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|